Description:Produced by poly-resin emulsion and micro-wax emulsion with careful techniques. The 1808 is non-skid, dust-prevent, hard and has good viscosity and shining effect with or without polishing.
Component:Acrylic acid polymer, Polyethylene, Water
Application:Maintenance for hard surface such as marble, granite, water stone, tile, PVC floor, wooden floor and epoxy floor.
Feature: Solid content: 18±0.5%
pH: 8.0-9.0
Storage: 1 year under room temperature
Instruction: Remove the old wax layer, clean with neutral cleanser and air-dry the surface. Daubing the products evenly on the surface by the mop. Wait for 30-60 minutes. When the wax layer dries, applying the second layer. Polishing the surface when necessary.
Attention:Please read the product information carefully before using. This product should be used under the good-ventilated environment. In the case of skin contact or get in the eyes, wash with water immediately. See doctor if necessary. Do not pour the products back into the container after taking out. Seal the container well and keep out of the reach of children, store the container under the temperature no lower than 0°C.
Transportation:Certified by Guangzhou Institute of Analysis, this product is non-explosive, non-flammable, non-oxidized, non-corrosion and non-toxic, safe for transportation. Report serial number: ST20120813-3.
