Manual

1.Clean the concrete surface with wire brush.

2.Prepare the surface to be dry and clean before apply any treatment.

3.Cover the area which is not coloring.

4.While spray the coloring agent on surface evenly using low pressure sprayer, spreading the coloring agent through mopping at the same time, until the agent is completely absorbed by concrete.

5.If the deeper color is wanted, apply coloring for twice or more times after the previous agent layer is dry (12 hours minimum, wait for longer time when temperature is low).

6.Leave the surface for minimum 24 hours (longer time under low temperature).

7.Remove the dust on surface, and then apply the curing agent.